No they are not. You could treat them with a Nikwax or DWR finish and make them "water resistant"

yes it does.

It is a hard shell jacket. No insulation.

Yes it comes with plates to accomodate 4 x 4 boards.

They do not.

60% cotton, 40% modal.

It is attached. Having a hood or not is personal preference, that aspect is up to you.

Recommended Use:
Snowboarding

But you can use it for an activity that you choose.

Same as your normal mid weight hoodie.

Yes they will.

Nope. Traditional camber.

149cm is the smallest they make.

Nope. All that is available is the Grey and they will not be re-stocking this item.

As long as it has the ICS (channel) then you will be fine. These bindings are EST and made to work only with ICS boards and no other.

You need to take it to your local shop and have it professionally done. Do not do it yourself.

they do not.

Yes. They have a mirrored coating.

No. They are based out of Salt Lake City Utah. They will happily ship you a pair if you order them. Oh yeah, these sunglasses are not polarized by the way.

This is more of a standard rather than slim fit pant.

Yes it is.

Yes the handle is removable from the blade.

You can use the bindings and boots (shoes as you call them) that you currently own. No need to buy new ones.

Yes they do, you can run the toe strap out over the toes or over the top. You would need the L/XL for your boot size.

Click on "view sizing chart" below the select options drop down menu. That will tell you the proper sizing for each one.

No, it is just a straight up camber board.

It is a rather soft board so you may want to consider something stiffer for "big airs"

Yeah 152cm would be perfect.

same as the purple with the grey and blue stripes.

light purple.

True to size. Get the 13.

They shouldn't. I have a pair of WESC headphones I ride with all the time in all conditions and they have never given out.

No, the skates straps do not expand out far enough.

You would need a different bag all together. This one is too small for your board.

Yes they will.

No insulation, just a shell.

Sorry it is permanently out of stock.

It is a very dark red, very suttle.

Normal weight. Just your typical hoodie weight.

9.5 would be a good choice. They will pack out about a 1/4 to 1/2 size.

the combination of flat camber and a very soft flex makes for a not so ideal board for jumps. If you do end up using it for that maybe go up a size for more stability.

Not to my knowledge. Electric does not do RX.

These are in U.S. Sizing

It has a thicker tongue, not the slim version.

The measurements are direct from Nikita and thus accurate.

It runs true to size so just get it in the normal size that you would wear.

Looks like a Large would fit you perfectly.

This beanie is decently thick. You would either have to take the padding out of your helmet or size up to a larger helmet for it to fit.

Baggy fit yes. It has no insulation but as long as you layer properly underneath you will be fine.

No real change except for the graphics.

Yes. It has the Zip Tech Pant to Jacket Interface.

Sorry, this is last years jacket and they will not be re-stocking it.

The shock would be your best bet, or even the super. With your boot size, the bigger the better.

It is flat, except for the tail kick.

Yes they are.