It looks like the orange color is clearanced out, and only available in an extra small, for the $387.94.

The upper compartment is padded the lower is more suitcase padding with Plastic floor.

We are currently out of stock on the longer poles, There are some coming shortly keep an eye out for them

It will keep snow up most boots do.It is black they say black absorbs heat keeping your toes warmer.

yes this will help any colder and I would start to look at insulated covers.

if you enter all your shipping information at check out this will generate three shipping choices for Canada. One will include all tarrifs and two will not depending upon how quickly you need gear.

Big negative the Shimano shifters need to pull 1.5 mm of cable per shift where as Sram only needs to pull 1mm.

On your seat post there is a stamp that will be in mm. (ex. 32.8) this is stamped right where the max insert line is.

Yes. the plate that slides inside the shoe is included

They are in tubular and clincher we just do not have any in stock.

It has wind stopper so it will block the wind nicely thus keeping you warm.

s, m, l These will go up your arms and tuck under your jersey sleeves. I would base it off the size jersey you wear. S-S, M-M, L-L unless you have abnormally long or short arms for you size.

Yes the clip for the tip slide over the ski.

The din is a measure that is constant through the entire industry. It is based on skier weight, ability and most affected by the length of ones boot sole. a larger boot requires a lower din than a smaller boot to release properly. With that said rather than cranking the DIN you can adjust the forward pressure a bit to create a tighter fit. By raising the Din you only make sure that the boot will not release properly. A higher Din binding will have stiffer springs allowing for a more accurate release. if you are over the age of 12 look for a 14 DIN.

We are at this time not able to handle special orders. Sorry Mate

Its a bit of a toss up. depending on length the Volkl my have a longer or shorter radius 16-20 m vs the line at 18m. The line is a bit wider throughout giving a bit more float in powder. Either way you will be ripping the entire mountain.

expedition Material: [Upper leg] 3-Layer 70D Taslan Gore-Tex; [Inner leg and boot section] 1000D Cordura/ Regular Material: Taslan Gore-Tex®, 1000d Cordura, and 8oz packcloth this is biggest difference I can find

as to when you start wearing the jacket is a personal choice when the weather turns cold I will start by wearing arm and knee warmers with va vest this makes it easy to remove items that can fit in jesery pockets. if it feels to cold for this then I will put on a light weight jacket which can also be stuffed in a pocket. then when it gets down around 35-40 degrees I move to leg warmers or tights and a jacket like this with a base layer under keeps me warm down to around 25 degrees. here are some great cool to cold weather optionshttp://www.backcountry.com/store/PLZ0246/Pearl-Izumi-Vagabond-Jacket-Mens.htmlhttp://www.backcountry.com/store/CST0101/Castelli-Nano-Arm-Warmer.htmlhttp://www.backcountry.com/store/PLZ0347/Pearl-Izumi-Vertex-Thermafleece-Bib-Knicker-Mens.htmlhttp://www.backcountry.com/store/GBW0052/Gore-Bike-Wear-Leg-Warmer-III.htmlhttp://www.backcountry.com/store/PLZ0262/Pearl-Izumi-Slice-Thermafleece-Cycling-Bib-Tight-Mens.html

This is a straight pull two cross lacing pattern.

I would use a standard BMX flat pedal rather than a clipless pedal for any type of BMX.

Like most pants there is always the chance of catching the chain ring. I would suggest a pant leg clip or rolling up the pant leg on the drive side like all the fixie riders do.

These are road specific shoes so unless you bring your own pedals a mountain bike shoe like Northwave Bike Lizzard Cycling Shoes size 39.5

You may be able to get a light base layer under this it will feel a bit snugger in shoulders when you do. if you are looking for cold weather outer jacket I would look at CapoForma S3 Cycling Jacket this is a windproof jacket.

Yes The Ultegra would be an upgrade from any crank that is 3 to 4 years old. Your derailleurs should work just fine. depending on the current gearing up front. You might have to tweak the F Der.a bit.

The EA90 SLX Wheelset has sealed ball bearings. Yes you can upgrade to ceramic sealed bearings. These would be purchased aftermarket.

These will work with the SPD-SL Cleats, Red fixed cleat or Yellow for float. They will realse laterallt to either side.